- Intel H470 Ultra Durable Motherboard with Dual NVMe PCIe Gen3 X4 M.2 Slots, 2-Way CrossFire Multi-Graphics, Intel GbE with cFosSpeed, USB 3.2 Gen1 Type-C, Q-Flash Plus, Smart Fan 5, RGB FUSION 2.0 , M.2 E-key Slot for CNVi WIFI Module Upgradable
Features
- Supports 10th Gen Intel Core Series Processors
- Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
- Dual NVMe PCIe Gen3 X4 M.2 Connectors
- Smart Fan 5 Features Multiple Temperature Sensors,Hybrid Fan Headers with FAN STOP
- Intel Optane Memory Ready
- Intel GbE LAN with cFosSpeed Internet Accelerator Software
- Intel USB 3.2 Gen 1 Type-C Support
- 3 Display Interfaces Support
- M.2 E-key Slot for PCIe WIFI Module Upgradable
- Anti-Sulfur Resistors Design
- RGB FUSION 2.0 with Multi-Zone Addressable LED Light Show Design, Support Addressable LED & RGB LED Strips
- Q-Flash Plus Update BIOS without Installing the CPU?Memory and Graphics Card
Specifications
CPU
- Support for 10th Generation Intel Core i9/Intel Core i7/Intel Core i5/Intel Core i3/Intel Pentium/Intel Celeron processors in the LGA1200 package
- L3 cache varies with CPU
CHIPSET
- Intel H470 Express Chipset
MEMORY
- Intel Core i9/i7 processors: Support for DDR4 2933/2666/2400/2133 MHz memory modules
- Intel Core i5/i3/Pentium/Celeron processors: Support for DDR4 2666/2400/2133 MHz memory modules
- 4× DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
- Dual channel memory architecture
- Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
- Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
- Support for Extreme Memory Profile (XMP) memory modules
ONBOARD GRAPHICS
- Integrated Graphics Processor-Intel HD Graphics support:
* 1× D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz
* 1× DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz (The DVI-D port does not support D-Sub connection by adapter)
* 1× HDMI port, supporting a maximum resolution of 4096×2160@30 Hz (Support for HDMI 1.4 version and HDCP 2.3)
* Support for up to 3 displays at the same time
* Maximum shared memory of 512 MB
AUDIO
- Realtek ALC887 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTEs website for details on configuring the audio software.
- Support for S/PDIF Out
LAN
- Intel GbE LAN chip (1000 Mbit/100 Mbit)
EXPANSION SLOTS
- 1× PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot
- 1× PCI Express x16 slot, running at x4 (PCIEX4)
- 3× PCI Express x1 slots
* All of the PCI Express slots conform to PCI Express 3.0 standard
- 1× PCI slot
- 1× M.2 Socket 1 connector for an Intel CNVi wireless module only (CNVI)
* Supports up to ASPM L1.2 power management protocols
MULTI-GRAPHICS TECHNOLOGY
- Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies
STORAGE INTERFACE
- 1× M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/x2 SSD support) (M2M_SB)
- 1× M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD support) (M2P_SB)
- 6 x SATA 6Gb/s connectors
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors
- Intel Optane Memory Ready
* System Acceleration with Intel Optane Memory enabled on the M2M_SB connector only
* M.2 connectors support up to ASPM L1.2 PCIe power management protocols
USB
- Chipset:
* 1× USB Type-C port on the back panel, with USB 3.2 Gen 2 support
* 1× USB 3.2 Gen 2 Type-A port (red) on the back panel
* 6× USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
* 2× USB 2.0/1.1 ports on the back panel
- Chipset+USB 2.0 Hub:
* 4× USB 2.0/1.1 ports available through the internal USB headers
INTERNAL I/O CONNECTORS
1× 24-pin ATX main power connector
1× 8-pin ATX 12V power connector
1× CPU fan header
3× system fan headers
1× addressable LED strip header
1× RGB LED strip header
6× SATA 6Gb/s connectors
2× M.2 Socket 3 connectors
1× front panel header
1× front panel audio header
1× S/PDIF Out header
1× USB 3.2 Gen 1 header
2× USB 2.0/1.1 headers
2× Thunderbolt™ add-in card connectors
1× Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
1× serial port header
1× Clear CMOS jumper
1× Q-Flash Plus button
BACK PANEL CONNECTORS
1× PS/2 keyboard/mouse port
1× D-Sub port
1× DVI-D port
1× HDMI port
1× USB Type-C port, with USB 3.2 Gen 2 support
1× USB 3.2 Gen 2 Type-A port (red)
4× USB 3.2 Gen 1 ports
2× USB 2.0/1.1 ports
1× RJ-45 port
3× audio jacks
I/O CONTROLLER
- iTE I/O Controller Chip
H/W MONITORING
- Voltage detection
- Temperature detection
- Fan speed detection
- Overheating warning
- Fan fail warning
- Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install
BIOS
- 1× 256 Mbit flash
- Use of licensed AMI UEFI BIOS
- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
FORM FACTOR
- ATX Form Factor (30.5×22.5 cm)
