GigaByte MB B560 HD3, S.1200, DDR4/3200, PCIe 4.0, SATA3, M.2, G-LAN, VGA/DVI-D/HDMI/DP, USB3.2, 7.1ch., ATX

Features - Supports 11th and 10th Gen Intel Core Series Processors - Dual Channel Non-ECC Unbuffered DDR4, 2 DIMMs - Direct 6+2 Phases Digital VRM Solution with Low RDS(on) MOSFETs - Dual Ultra-Fast NVMe PCIe 4.0* /3.0 x4 M.2 - GIGABYTE Exclusive 8118 Gaming LAN with Bandwidth Management - High Quality Audio Capacitors and Audio Noise Guard with LED Trace Path Lighting - RGB FUSION 2.0 Supports Addressable LED & RGB LED Strips - Smart Fan 6 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP - Q-Flash Plus Update BIOS without Installing the CPU, Memory and Graphics Card * Actual support may vary by CPU. Specifications CPU - 11th Generation Intel Core i9/i7//i5 processors - 10th Generation Intel Core i9/i7//i5/i3, Pentium and Celeron processors* * Limited to processors with 4 MB Intel Smart Cache, Intel Celeron G5xx5 family - L3 cache varies with CPU CHIPSET - Intel B560 Express Chipset MEMORY - 11th Generation Intel Core i9/i7/i5 processors: Support for DDR4 5333(O.C.) / DDR4 5133(O.C.) / DDR4 5000(O.C.) / 4933(O.C.) / 4800(O.C.) / 4700(O.C.) / 4600(O.C.) / 4500(O.C.) / 4400(O.C.) / 4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz - 10th Generation Intel Core i9/i7 processors: Support for DDR4 2933/2666/2400/2133 MHz memory modules - 10th Generation Intel Core i5/i3/Pentium/Celeron processors: Support for DDR4 2666/2400/2133 MHz memory modules - 4× DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory - Dual channel memory architecture - Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) - Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules - Support for Extreme Memory Profile (XMP) memory modules ONBOARD GRAPHICS - Integrated Graphics Processor: - 1× D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz - 1× DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz * The DVI-D port does not support D-Sub connection by adapter. - 1× DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz * Support for DisplayPort 1.2 version and HDCP 2.3 * When the D-Sub port and DisplayPort are connected at the same time, images will output from the DisplayPort only. - 1× HDMI port, supporting a maximum resolution of 4096x2160@30 Hz * Support for HDMI 1.4 version and HDCP 2.3. (Graphics specifications may vary depending on CPU support.) AUDIO - Realtek audio codec - High Definition Audio - 2/4/5.1/7.1-channel - Support for S/PDIF Out LAN - Realtek GbE LAN chip (1000 Mbit/100 Mbit) EXPANSION SLOTS - 1× PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. (The PCIEX16 slot conforms to PCI Express 4.0 standard.) - 1× PCI Express x16 slot, running at x4 (PCIEX4) - 2× PCI Express x1 slots (The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.) STORAGE INTERFACE - CPU: - 1× M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_CPU)** - Chipset: - 1× 1 x M.2 connector (Socket 3, M key, type 2260/2280 SATA and PCIe 3.0 x4/ x2 SSD support) (M2A_SB) - 6× SATA 6Gb/s connectors - Intel Optane Memory Ready: * System acceleration with Intel Optane Memory can only be enabled on the M2P_CPU connector and with an 11th Generation Intel processor installed. ** Supported by 11th Generation processors only USB - 6× USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) - 6× USB 2.0/1.1 ports available through the internal USB headers Chipset + USB 2.0 Hub: 2× USB 2.0/1.1 ports available through the internal USB headers INTERNAL I/O CONNECTORS 1× 24-pin ATX main power connector 1× 8-pin ATX 12V power connector 1× CPU fan header 1× water cooling CPU fan header 3× system fan header 1× addressable LED strip header 1× RGB LED strip header 6× SATA 6Gb/s connectors 2× M.2 Socket 3 connector 1× front panel header 1× front panel audio header 1× USB 3.2 Gen 1 header 3× USB 2.0/1.1 header 1× S/PDIF Out header 2× Thunderbolt add-in card connectors 1× Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 1× serial port header 1× parallel port header 1× Clear CMOS jumper 1× Q-Flash Plus button *All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W. BACK PANEL CONNECTORS 2× USB 2.0/1.1 ports 1× PS/2 mouse/keyboard port 1× D-Sub port 1× DVI-D port 1× HDMI port 1× DisplayPort 4× USB 3.2 Gen 1 ports 1× RJ-45 port 6× audio jacks I/O CONTROLLER - iTE I/O Controller Chip H/W MONITORING - Voltage detection - Temperature detection - Fan speed detection - Overheating warning - Fan fail warning - Fan speed control * Whether the fan speed control function is supported will depend on the cooler you install BIOS - 1× 256 Mbit flash - Use of licensed AMI UEFI BIOS - PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 FORM FACTOR - ATX Form Factor (30.5cm × 22.5cm)