Elsist UPS Nemo LCD 200 2000VA/1000W, Line-Interactive, USB, RJ11/RJ45, 2×IEC, 2×Schuko, 2×9Ah, 10min. autonomija

Main characteristics FULL POWER PROTECTION - Electrical noise suppression, voltage and overvoltage peak suppression, autonomy, are common requirements to many UPS types - This UPs provides a wider voltage range capability, in addition to the aforementioned characteristics - Within this wide voltage range, the load is supplied without any support from the battery - This feature not only protects your computer, but also improve and increases battery lifetime COLD START FUNCTION (DC START) - All NEMO2.0 models are equipped with cold start function, which means that even if the power supply is unplugged, the UPS can be activated simply by pushing the ON / OFF switch and will operated supplied by the battery AUTORESTART - Upon returning the Mains, the UPS will restart automatically OVERLOAD PROTECTION - The internal microprocessor controls the load status in any operating conditions - In the event of overload or short circuit, your UPS will beep or will automatically turn off to avoid undesired damage to the load MODEM CONNECTION AND PROTECTION - Two special connectors RJ45/RJ11, will protect your Modem or your LAN 10Base-T network from any noise generated by the phone line POWER MANAGEMENT SOFTWARE - NEMO2.0 series includes UPSilon software that enables communication between the UPS and a PC. By connecting the USB port of the UPS to a corresponding PC port, you can either check or do the following: * to control UPS and battery status * to save vital files during unattended shutdown * to plan Turn off and Turn on of the UPS for energy saving * to Log the UPS activities and status for checking them over the time - All controls are performed and guaranteed by a high reliability microprocessor - "Green Power" function for energy saving - Light weight and compact dimensions Specifications INPUT - Input Voltage: 220-230-240Vac - Input voltage range: 162-290Vac - Frequency: 50/60Hz (auto selection) OUTPUT - Output Voltage: 230Vac - Voltage tolerance: +/-10% - Frequency: 50/60Hz (following input frequency) - Power: 2000VA - Active Power: 1000W - Switching time: 2-6 mS tpc - IEC outlet: 2 - Schuko outlet: 2 NOISE FILTERING - Modem / T port (10BaseT/100baseT): RJ11/RJ45 (network compatible) BATTERY - Typ. Autonomy time: 10 min - Battery capacity: 2× 9Ah - Type: Maintenance-free, sealed lead-acid - Recharging time: 6-8 hr at 90% after a deep discharge PROTECTION - Overvoltage/Undervoltage: Switch to "Battery mode" - Overload/Shortcircuit: Fuse and Electronic threshold (both on "Mains mode" and on "Battery mode") MECHANICAL CHARACTERISTICS - Dimensions (W×D×H): 158×380×198 mm - Weight: 10 kg ENVIROMENT - Ambient: Temperature 0C to 40C, Humidity 0-90% without condensation, altitude max. 3000 mt. - Audible noise: < 40dbA (measured at 1mt.) both on "Mains mode" and on "Battery mode" STANDARD - IEC/EN62040-1 IEC/EN62040-2 IEC/EN62040-3 IEC/EN60950-1